Replacement Membranes for Creativision controllers

Discuss the CreatiVision hardware: models, revisions, fixing, hacking and modding.
Post Reply
Mamejay
Posts: 23
Joined: Mon Nov 03, 2014 11:35 am
Location: Melbourne, Australia

Re: Replacement Membranes for Creativision controllers

Post by Mamejay » Fri Jul 15, 2022 5:24 am

Hi Chesh,
I have been following your work and think its amazing!! So in theory these boards will be made using thin PCB's and installed into the controller as normal. How will each PCB connect? Just VIA soldered wires?
I will be placing a board order soon for some other things and want to include a few of these sets as well. Both my controllers are beyond repairing.

cheshirenoir wrote:
Fri Jul 15, 2022 1:59 am
A few hours of measuring, re-measuring, ripping up everything when you realised the connectors were on the wrong orientation and reworking I get:Joystick1.2.jpg
OK I am happy with this! Onto the lower portion which should have the world's most boring schematic. To wit, exactly 1 pin.

Chesh

BTW, has anyone else realised that with the Shottky diode trick, there's nothing stopping us making a full mechanical keyboard using Cherry MX style keys? :-D
User avatar
cheshirenoir
Posts: 279
Joined: Sun Jun 02, 2019 5:17 am

Re: Replacement Membranes for Creativision controllers

Post by cheshirenoir » Fri Jul 15, 2022 1:26 pm

Yeah I was going to just connect them up with strands of ribbon cable. The designs are so that, at least for the joystick sub assembly, you could tack solder to the outside of the board.
No idea if the joysticks will work yet :-D

Good luck with it, if you get yours before me. BTW I was planning on using the 4x4x0.8 "gold" buttons from here :-)
https://www.aliexpress.com/item/4001317902663.html

John
User avatar
cheshirenoir
Posts: 279
Joined: Sun Jun 02, 2019 5:17 am

Re: Replacement Membranes for Creativision controllers

Post by cheshirenoir » Sun Jul 24, 2022 4:11 am

OK an update: I've ordered the PCBs and the tactile buttons. Still need to order the Zener diodes but one thing at a time here :-)
The PCB has undergone multiple revisions since my last update. Been doing a lot (and I mean a lot) of work in KiCAD recently, and some of that has rubbed off on the current build. It's four PCBs, designed to be manufactured on a 0.6mm PCB (Which is the same price as normal PCBs from JLCPCB.)
I still need to order a bazillion Shottky diodes, bu that'll have to wait for my next pay packet :-D

I've opened up an initial GitHub for this project: https://github.com/cheshirenoir/CreatiV ... eplacement

John
User avatar
Scouter3d
Posts: 646
Joined: Mon Jun 28, 2010 7:02 am
Location: Wien
Contact:

Re: Replacement Membranes for Creativision controllers

Post by Scouter3d » Mon Jul 25, 2022 8:19 pm

Thanks to cheshirenoir and his scan i have traced and vectorized the joystick membrane and will try my luck etching one on flex-pcb in the next days...

Cheers, TOM:0)
Joystick_membrane.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
cheshirenoir
Posts: 279
Joined: Sun Jun 02, 2019 5:17 am

Re: Replacement Membranes for Creativision controllers

Post by cheshirenoir » Tue Jul 26, 2022 2:08 am

I'm excited that we may have more than one solution coming for the old controllers. :-)

Crossing my fingers for you, TOM.

John
User avatar
Scouter3d
Posts: 646
Joined: Mon Jun 28, 2010 7:02 am
Location: Wien
Contact:

Re: Replacement Membranes for Creativision controllers

Post by Scouter3d » Tue Jul 26, 2022 6:18 am

Hi Chesh, yes it is exciting! Maybe the best solution will be a combination of both worlds :0)
Mamejay
Posts: 23
Joined: Mon Nov 03, 2014 11:35 am
Location: Melbourne, Australia

Re: Replacement Membranes for Creativision controllers

Post by Mamejay » Tue Jul 26, 2022 7:26 am

This is amazing. So funny. I have had the Wizard for years now and never fired it up. The second I do this is when movement happens on the controllers which is exactly what I need. My poor which controllers are totally stuffed.
I hope the PCB's work. Just feel they will be easier to make and be much stronger in the long run.
So do both controllers have the exact same layout?
User avatar
kakaboy
Posts: 11
Joined: Tue Jul 26, 2022 7:12 am

Re: Replacement Membranes for Creativision controllers

Post by kakaboy » Tue Jul 26, 2022 9:31 am

This is brilliant work! Exactly what I feel most of us need about now.

Has anyone ordered the joystick PCB yet?
User avatar
Scouter3d
Posts: 646
Joined: Mon Jun 28, 2010 7:02 am
Location: Wien
Contact:

Re: Replacement Membranes for Creativision controllers

Post by Scouter3d » Tue Jul 26, 2022 10:10 am

Hi kakaboy,

the whole project of replacement PCBs is currently in a pre-beta phase i would say... everything is in the making! You choose the perfect time to unearth your wizzard :0)

Cheers, TOM:0)
User avatar
kakaboy
Posts: 11
Joined: Tue Jul 26, 2022 7:12 am

Re: Replacement Membranes for Creativision controllers

Post by kakaboy » Sat Jul 30, 2022 1:21 am

Thanks Tom,

project is very interesting and yes re entering hit the sweet spot!
Post Reply