Replacement Joystick-handle 3D model / 3D print

Talk about programming CreatiVision (except games programming). Projects of homebrew hardware are also welcome.
Post Reply
User avatar
Scouter3d
Posts: 646
Joined: Mon Jun 28, 2010 7:02 am
Location: Wien
Contact:

Replacement Joystick-handle 3D model / 3D print

Post by Scouter3d » Thu Mar 30, 2023 6:06 am

Hi,

One of my CV´s came with a (very ugly) white replacement for the Joystick handle...

here is my first go for a Joystick-handle replacement, the model works fine, but the 3D print process needs to be optimized, this is not yet the best print quality and the "supports" didn´t work as good as i hoped... maybe i have to "remodel" the topface of the stick to be flat for easy printing...

More soon...

Cheers, TOM:0)
20230330_075605.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
Scouter3d
Posts: 646
Joined: Mon Jun 28, 2010 7:02 am
Location: Wien
Contact:

Re: Replacement Joystick-handle 3D model / 3D print

Post by Scouter3d » Thu Mar 30, 2023 9:56 am

Ok, so here is V2...

The stick is made of 3 parts.
Part 1 (the bottom-part) should be placed "upside down" and needs supports
Part 2 (the top-part) should also be placed "upside down" no supports needed with this one
Part 3 (the middle part) should be printed "standing upright" can also be replaced with a metal part (6mm diameter and 24mm lenght)

STL and Blender 3D files are attached and free for everyone to play with :0)

20230330_113837.jpeg
Cheers, TOM:0)
You do not have the required permissions to view the files attached to this post.
User avatar
cheshirenoir
Posts: 279
Joined: Sun Jun 02, 2019 5:17 am

Re: Replacement Joystick-handle 3D model / 3D print

Post by cheshirenoir » Thu Mar 30, 2023 10:18 am

Excellent work there!
Post Reply